Avionics: Pyrovane engine monitoring

Pyrovane is the first Ridgelift instrument line, an engine monitor for experimental amateur-built and light-sport aircraft. It is not meant for certified airplanes.

Status: Pyrovane is currently testing, with production in Q2 2027. It has not been flight tested, it is not TSO'd, and it is not for sale yet.

Pyrovane lineup

NameForm factorStatus
Pyrovane V55-inch portrait display meant to fit a standard 3-1/8 inch panel hole, with knob or touch optionsCurrently testing, production Q2 2027
Pyrovane CoreData acquisition unit behind the panel, for probes, pressures, fuel flow, and engine dataCurrently testing, production Q2 2027
Pyrovane S3Simpler, lower-cost 3-1/8 inch engine box for small enginesCurrently testing, production Q2 2027
Pyrovane AIM-1Annunciator and auxiliary I/O unit, with caution and warning lamps and extra inputsCurrently testing, production Q2 2027
  • During testing, a separate engine monitor should remain the primary instrument.
  • Designs and specifications are targets and may change.
  • Engines in the design target include common light-aircraft piston engines and ECU-equipped auto conversions. That is a design target, not a compatibility claim.
  • A goal is to be at EAA AirVenture in 2027. That is a goal, not a confirmed booth.

Concept renders

These are concept renders built from the written design dimensions. They are not photographs, not CAD exports, and the screens show simulated values. Pyrovane is a prototype: not flight tested, not TSO'd, and not for sale. Select a picture to see it larger.

The Pyrovane family in one concept render: the V5 display, the S3 monitor, the Core data unit and the AIM-1 unit.
The Pyrovane family: V5, S3, Core and AIM-1
Concept render of a V5 and an S3 installed in a panel, for illustration.
V5 and S3 in a panel, for illustration

V5 panel display

Portrait 5-inch display for a standard 3-1/8 inch instrument hole. Currently testing, production Q2 2027.

Pyrovane V5 concept render, front, showing the engine page with RPM, manifold pressure, temperatures and fuel.
V5, front
Pyrovane V5 concept render from three-quarter view, with the round body behind the face.
V5, three-quarter
Pyrovane V5 concept render from the rear, with labels for the static port, GNSS antenna, camera input and the main connector.
V5, rear, labelled
Pyrovane V5 concept render, exploded view of the rear cap, body, clamp ring, main board, display module, front frame, keys and knob.
V5, exploded view

S3 engine monitor

Simpler, lower-cost 3-1/8 inch engine monitor for small engines. Currently testing, production Q2 2027. Every S3 number is a target.

Pyrovane S3 concept render, front, with a square display and three keys and a knob.
S3, front
Pyrovane S3 concept render from three-quarter view.
S3, three-quarter
Pyrovane S3 concept render from the rear, with labels for the two connectors and the manifold pressure port.
S3, rear, labelled

Core data unit

Box behind the panel that reads the engine sensors, runs the alarms and drives the master lamps. Currently testing, production Q2 2027.

Pyrovane Core concept render, sensor side, with labels for the thermocouple and analog connectors, ground stud and mounting flanges.
Core, sensor side, labelled
Pyrovane Core concept render, power and data side, with labels for the RPM, fuel flow and discrete connector and the power and data connector.
Core, power and data side, labelled
Pyrovane Core concept render, top view.
Core, top

AIM-1 auxiliary unit

Annunciator and extra input and output box. Currently testing, production Q2 2027.

Pyrovane AIM-1 concept render, airframe input side, with labels for the airframe connector, antennas and the humidity sensor vent.
AIM-1, airframe side, labelled
Pyrovane AIM-1 concept render, power and data side, with labels for the probe ports and the power and data connector.
AIM-1, power and data side, labelled

Key specifications

Design numbers, not test results. D is set in the design on paper, DT is a design target, and T is an engineering target. Nothing here has been measured on hardware, and every number may change.

ItemV5CoreS3AIM-1
RolePanel display, portraitData unit behind the panelStand-alone 3-1/8 in engine monitorExtra inputs, outputs and lamp driver
StatusCurrently testing, production Q2 2027Currently testing, production Q2 2027Currently testing, production Q2 2027Currently testing, production Q2 2027
Display5.0 in IPS, 720 × 1280 portrait, 1100 cd/m² typical (D)None, status light (T)About 3.5 in square IPS, 720 × 720 class (T)None, status light (T)
Panel fitStandard 3-1/8 in hole (D)Behind the panel or on a firewall shelf (D)Standard 3-1/8 in hole (T)Behind the panel (D)
Size86.9 × 177.5 mm face; 78 mm round body, 62 mm deep (D)160 × 110 × 45 mm (DT)82.6 × 100 mm face; 78 mm round body, 55 mm deep (T)110 × 75 × 30 mm (DT)
Depth behind panelAbout 69 mm with connector (D)Not applicable65 mm or less with connector (T)Not applicable
Weight450 g or less; 545 g with battery and ring (DT)About 550 g (DT)340 g or less (T)About 250 g (DT)
Input power9 to 32 V, runs down to 8 V (D)9 to 32 V, rides through cranking to 6.5 V (D)9 to 32 V, runs down to 8 V (T)9 to 32 V plus keep-alive (D)
Typical draw4 to 7 W (DT)1.5 to 2.5 W plus sensors (DT)4 W typical, 6 W max (T)0.6 W, 1.0 W with Wi-Fi (DT)
Engine inputsNone direct; data from the Core (D)18 thermocouples, 8 pressures, 12 temperatures, 4 fuel levels, 6 frequency, volts, amps, 6 analog, 2 vibration (D)8 thermocouples, 4 temperatures, 3 pressures plus MAP, 2 levels, 3 frequency, volts, amps (T)8 airframe analog, 16 discrete, 2 current shunts, 2 probe pods (D)
Operating temperature−20 to +70 °C (DT)−40 to +85 °C (DT)−20 to +70 °C (T)−40 to +85 °C (T)

Dimensioned drawings

Reference drawings from the design dimensions. Do not cut a panel from them; the hole position is a target until the enclosure is final.

Dimensioned reference drawing of the Pyrovane V5.
V5 drawing
Dimensioned reference drawing of the Pyrovane S3.
S3 drawing
Dimensioned reference drawing of the Pyrovane Core.
Core drawing
Dimensioned reference drawing of the Pyrovane AIM-1.
AIM-1 drawing

Attitude display drawing

This is an interactive drawing of a synthetic-vision attitude display, the style we like for the screens we are working on. Drag on it, or click it and use the arrow keys, to bank and pitch. Let go and it levels out.

It is a web drawing. It is not Pyrovane, it is not a flight instrument, and it does not show real data.

Hangar tools you can use now

Synthetic vision · demoDrag to fly
Demo display. Not a flight instrument.

Get Pyrovane news by email.

One list for the instruments and the rest of the shop. No payment.

Free. No payment and no deposit. News only, and every email we send has an unsubscribe link. If the signup service cannot be reached, this opens a message to hello@ridgeliftaero.com for you to send. See the Privacy Policy.